Polyether-modified silicone defoamer HY-6800

Overview:

HY-6800 is a polyether modified siloxane with excellent defoaming and foam suppression capabilities, suitable for water-based, solvent based, and solvent-free systems. It has good suppression and elimination effects on the bubbles generated during the manufacturing and construction of coatings. A very small amount of addition can meet the requirements, suitable for most systems with high requirements for defoaming and foam suppression performance.
Physical indicators:

Appearance: Milky white fluid fluid

Solid content (%) : ≥98%

Stability (3000 RPM /20 min) : no stratification

Density (25 ° C, g/cm3) : 0.95-1.05

PH value: 6-8

Usage:

Can be added as the original or pre-diluent, and pre-dilution with the recommended solvent simplifies addition and mixing. Addition amount: the addition amount is very small, one ten-thousandth can have an effect, usually about 0.05%-0.2% of the total amount of the system, and different formulas need to be experimented to determine the optimal addition amount. There may be a little layering when left for a long time, and it can be shaken slightly before use without affecting the performance of the product.
Storage packaging:

Packaging: This product is packaged in original 25/200KG barrels (can be split);

Storage: Store in a cool and sheltered place, sealed and stored;

Transportation: This product should be well sealed during transportation to prevent moisture, strong alkalis, acids, and rainwater from entering.

Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.