
Silicone surface additives for aqueous, solvent-based and solvent-free systems that strongly reduce surface tension and improve slip.
Silicone surface additive HY-378
Overview:
Solvent-free silicone surface additives for aqueous, solvent-borne and solvent-free systems that increase surface slip and significantly reduce surface tension at low dosage levels and have low foam stability.
Technical Indicators:
Chemical composition: polyether modified dimethyl polysiloxane
Density (20 °C): 1.02 g/ml
Refractive index (20 °C): 1.440
Application information:
Coating industry
Features and benefits
The additive significantly increases surface slip and thus scratch resistance. HY-378 drastically reduces surface tension, resulting in excellent substrate wetting properties and good anti-cratering effect, while also preventing the "frame" effect. In matte systems, the additive can enhance the directional arrangement of matting agents. HY-378 has a good effect even at low addition levels and has low foam stability. The additive exhibits broad compatibility in aqueous, solvent-based and solvent-free systems, is easy to recoat, and does not cause oil spots.
Recommended for: Architectural Coatings, Automotive Coatings, Canning Coatings, Industrial Coatings, Leather Coatings, Wood & Furniture Coatings
Recommended dosage: 0.01-0.3 % Additive (supply form) Based on the total formulation, can be increased to 0.5% in special cases.
Adhesives
Features and benefits
The additives drastically reduce the surface tension and thus have good substrate wetting. HY-378 also has a good effect at low addition levels and has low foam stability. The additive has no negative effect on adhesion and does not migrate.
Recommended for: HY-378 can be used with all common reactive adhesives such as polyurethane, epoxy or acrylic adhesives.
Recommended Dosage: 0.01-0.3% additive (supplied form) Based on total formulation, can be increased to 0.5% in special cases.
Storage & Transport: When the temperature is below 5 °C, turbidity and delamination may occur, please heat to 20 °C and mix well before use. Store tightly sealed at room temperature and have an expiration date of 24 months. 25KG plastic drum.
Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.