Defoamer wetting agent HY-4100

Product Description:
 The additive is a wetting additive specifically designed for waterborne coating systems to achieve the superior wetting capacity and defoaming efficacy required by the customer. It is suitable for waterborne polyurethane, waterborne acrylate, and waterborne epoxy systems. Its unique foam-free and super-wetting properties can be applied to spray processes, high-speed rolling processes, and difficult-to-wet surfaces/substrates.

Technical indicators:
 Appearance: light yellow transparent liquid

Active substance content: ≥ 98% 

Viscosity (25℃) : 50-100cp

Product characteristics:
 When HY-4100 defoaming wetting agent is applied to water-based coatings, the ideal pH value should be between pH 6.5-8.5. Outside of this range, wettability decreases significantly over time. When applied to the water-based ink system, it can promote the wetting and dispersion of pigments and prevent the flocculation of pigments, thereby improving the storage stability of the formulation, improving gloss and coloring ability.
Suggested dosage and usage:

It can be added as the original or pre-diluent, and pre-dilution with the recommended solvent simplifies addition and mixing.

Dosage: 0.2-2% based on total recipe

Precautions:

This leveling aid is widely used, but the amount of addition and whether it is stable should be determined by experiments before use. This additive is recommended for use in all water-based coatings and inks.

Storage Packaging:

Packaging: This product is packaged in original 25/200KG barrels (can be split);

Storage: Store in a cool and sheltered place, sealed and stored;

Transportation: This product should be well sealed during transportation to prevent moisture, strong alkalis, acids, and rainwater from entering.

Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.