Wetting dispersant HY-161

Overview:

HY-161 is a high molecular weight block copolymer solution containing pigment affinity groups, which is a cationic wetting and dispersing agent, which is used as a wetting and dispersing agent for solvent-based automotive coatings, industrial coatings and pigment concentrate slurries. It is particularly suitable for stabilizing very fine carbon blacks and organic pigments, especially two-component polyurethanes and baking systems. Significantly reduces the viscosity of the abrasive.
Typical materialized data:

Features and benefits:

This high molecular weight additive deflocculates and stabilizes the pigment by steric hindrance. The same charge is applied to the pigment particles, and the resulting repulsive force and steric stabilization effectively avoid possible co-flocculation, so that the multi-pigment system does not produce floating and blooming. The deflocculation properties of the additive increase the gloss, color intensity, clarity and hiding power of the coating while reducing the viscosity of the abrasive.
Fields of application:
  Automotive coatings   Industrial coatings   Architectural coatings   Anticorrosive coating system
Recommended Dosage:
  The amount of additives used (purchased form) is based on the pigment:

The above data is empirical dosage, and the actual dosage needs to be determined through a series of tests.
Usage:
        The additives should be added to the abrasive first, and then the pigments should be added. The resin and solvent components of the abrasive are pre-mixed and then the additives are slowly added with constant stirring. Pigments should not be added until the additives are mixed evenly.
Special attention:

Stratification or turbidity may occur at temperatures below 0 °C, heat to 20 °C and mix well. The surface treatment of certain organic pigments can adversely affect the potency of this wetting and dispersing agent. In this case, the same type of untreated pigment can be tried. When used in coil coatings, the interaction between the cationic additive and the acid catalyst must be considered.

Storage and packaging:

Packaging: This product is packaged in original 25/200KG barrels (can be split);

Storage: Store in a cool and sheltered place, sealed and stored;

Transportation: This product should be well sealed during transportation to prevent moisture, strong alkalis, acids, and rainwater from entering.

Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.