Defoamer HY-NXZ

Product Overview:

        HY-NXZ is a general-purpose defoamer with good compatibility and no craters, and is recommended for liquid defoamers for water-based emulsion paints and mortars, latex paints and adhesives.

Physical and chemical data:

Chemical composition: mixture of mineral oil and non-ionic surfactant

Solids content: 98%

VOC content: <0.1%

Recommended for low VOC systems: Yes

Moisture content: ~ 0.25%

Density (20 &deg; C) : ~ 0.87g /cm3

Viscosity: ~ 450 m Pa S

Product Features:

-Liquid defoamer for latex paints and adhesive systems.

-Mineral oil-based defoamer.
-Good compatibility and no fisheye

Application recommendation:

General defoamer for flat coatings and adhesives, waterborne emulsion paints and mortars, defoamer for emulsion coatings based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene-vinyl acetate, vinylidene chloride and water-soluble alkyd resin systems.

Recommended amount to add:

The recommended dosage is 0.2-0.5% of the total formula. In adhesives, the recommended dosage is 0.5-1.0% of the total volume of the system.

Storage packaging:

Packaging: This product is packaged in original 25/200KG barrels (can be split).

Storage: Store in a cool and sheltered place, tightly sealed.

Transportation: This product should be well sealed during transportation to prevent moisture, strong alkalis, acids, and rainwater from entering.

Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.