Contact Us
+86-17717409276
Huryan  Material  Co., Ltd.
Huryan  Material  Co., Ltd.
SiSiB® FSE8100
Rheology Additive HY-420

HY-420 is recommended for anti-settling of water-based pigments, fillers and matting agent concentrates.


Rheology Additive HY-420

Rheology Additive HY-420

Overview:

HY-420 is recommended for anti-settling of concentrated slurry of water-based pigments, fillers and matting agents. Or to improve the sag resistance and leveling effect of the coating, depending on the specific dosage. When added to the aqueous pigment suspension, the additives can form a three-dimensional network structure. In this way, thixotropic fluidity can be generated to prevent sedimentation and improve sag resistance. Adding abrasives in the pigment dispersion stage can ensure good dispersibility, thus obtaining better construction performance.

Typical materialized data:

Product composition

Modified urea solution

Dosage of additives

0.3-1.5% anti-settlement;

0.3-3% anti-current hanging

Solvent

N-methylpyrrolidone

Active fraction

52%

Features and Uses:

Excellent shear thinning properties, anti-settling and anti-sagging properties. Provides excellent anti-settling properties to water-based pigment concentrates at lower viscosities. When used in pigment concentrates, the concentrate is added to the paint without affecting the viscosity of the paint. Liquid additives for ease of use. There is no need to control pH or temperature. It has good versatility and high efficiency in aqueous systems and pigment concentrates.

Scope of application:

Water-based pigment paste,

Water-based pigment and filler slurry,

Matting paste.

Usage:

Addition during the grinding stage can achieve better dispersion and effect. It is added to the coating system at medium shear to ensure homogeneous mixing and rapid dispersion, without the need for special temperature and pH control. It can also be added during the paint mixing stage to adjust the viscosity. If the post-addition is not evenly dispersed, the compatibility can be improved by co-solvents.

HY-420 rheology agent contains chloride ions, it is recommended to use plastic or packaging barrels with inner coating to store the finished paint to avoid corrosion; If a metal drum is used, it needs to be tested for corrosiveness. In the dry film, no negative effects on corrosion were found.

Storage and Transportation:

Sensitive to moisture. Slight turbidity during storage does not affect the rheological effect. It is valid for 24 months under sealed packaging at room temperature. 25KG plastic drum, this product is non-dangerous goods and can be transported according to general chemicals.


Additional Disclaimer: This information is based on the information and experience currently available to us. It only describes the performance of our products, but does not guarantee the performance of the products in a legal sense. It is recommended to test our products first to determine if they can achieve the desired results.

Sample? Literature? Pricing? Technical?
Recommended Water-based rheological additive Products